The steel bar shed, also known as the protective shed, plays an indispensable protective role in construction sites. When setting up the steel bar shed, it is important to pay attention to several points:

1. 东西式吉祥虎白菜彩金网论坛 搭设详细尺寸按照现场现实环境肯定。

1. The specific size of the tool type steel bar processing shed shall be determined based on the actual situation on site.

2. 搭设在塔吊反转展转半径和修建物周边的加工车间设置双层硬质防护。

2. Double layer hard protection shall be installed in the processing workshop located around the turning radius of the tower crane and the building.

3. 加工车间空中需软化，宜选用砼空中。

3. The ground of the processing workshop needs to be hardened, and concrete ground should be selected.

4. 加工车间顶部应张挂宁静警示标识和宁静宣扬用语的 横幅，横幅宽度宜为1m。

4. Safety warning signs and safety propaganda slogans should be hung on the top of the processing workshop, with a width of 1m.

5. 东西式吉祥虎白菜彩金网论坛 需在夺目处挂操纵规程图牌，图牌 的尺寸为：宽×高=2000mm×1000mm。

5. The tool type steel bar processing shed should be prominently hung with an operating procedure diagram board, with a size of: wide × Height=2000mm × 1000mm。

6. 各类型材及构配件规格为参考值，详细规格应按照当 地风荷载、雪荷载停止核算。

6. The specifications of various profiles and components are reference values, and the specific specifications should be calculated based on local wind and snow loads.

7. 南边地域，如遇台风应接纳防风办法，可设置缆风绳。

7. In the southern region, if encountering a typhoon, wind prevention measures should be taken and cable ropes can be set up.

施工现场一切钢筋加工厂均需设置钢筋棚，一切露天安排的施工装备均应搭设宁静钢筋棚，如搅拌机、沙浆机、保送泵：在修建物坠落半径内或塔吊笼盖规模内的钢筋棚需 要设置双层防护;

All steel bar processing yards on the construction site need to be equipped with steel bar sheds, and all construction equipment placed in the open air should be equipped with safety steel bar sheds, such as mixers, mortar machines, and delivery pumps. Steel bar sheds within the falling radius of buildings or within the coverage range of tower cranes need to be equipped with double layer protection;

钢筋棚立柱接纳方钢或圆钢建造，刷建工蓝油漆，钢筋棚两侧应设置八字撑，并满挂密目菜园子菠菜论坛 ，一切程度杆节制伸出立杆外侧100mm;

The columns of the steel reinforcement shed shall be made of square or round steel, painted with construction blue paint. On both sides of the steel reinforcement shed, octagonal braces shall be set up, and dense safety nets shall be fully hung. All horizontal rods shall extend 100mm beyond the outer side of the upright rods;

本文由吉祥虎白菜彩金网论坛 建造清算宣布，您是否是对这些内容有所领会了呢?更多的内容请点击：//feelingvision.com咱们会有更多出色内容等你检查。

This article is produced, organized, and published by the steel bar processing shed. Do you have any understanding of these contents? For more information, please click on: //feelingvision.com We will have more exciting content waiting for you to check out.