The reinforcement processing shed is a site for reinforcement processing operations such as straightening, bending, and welding of reinforcement on the construction site. The length and width of the steel bar processing shed should be determined based on the number of steel bars processed and the number of machines used. Generally, there are 6 ×

9m、6×

9m、6 ×

12m、9×12m等几种，能够按照现实环境酌情接纳，也可自行设想长宽尺寸。

12m、9 × Several types, such as 12m, can be used according to actual conditions, or you can design your own length and width dimensions.

工地钢筋棚的搭设还要注重一下几点：

The following points should be paid attention to when erecting the reinforcement shed on the construction site:

1.东西式吉祥虎白菜彩金网论坛 搭设详细尺寸按照现场现实环境肯定。

The specific size of the tool type reinforcement processing shed shall be determined based on the actual situation on site.

2.搭设在塔吊反转展转半径和修建物周边的加工车间设置双层硬质防护。

2. The processing workshop set up around the turning radius of the tower crane and the building shall be provided with double layer hard protection.

3.加工车间空中需软化，宜选用砼空中。

The ground of the processing workshop needs to be hardened, and concrete ground should be selected.

4.加工车间顶部应张挂宁静警示标识和宁静宣扬用语的横幅，横幅宽度宜为1m。

The top of the processing workshop should be hung with safety warning signs and safety propaganda banners, with a width of 1m.

5.东西式吉祥虎白菜彩金网论坛 需在夺目处挂操纵规程图牌，图牌的尺寸为：宽×高=2000mm×1000mm。

5. The tool type reinforcement processing shed shall be hung with an operation specification drawing board at a conspicuous place, and the size of the drawing board is: wide × Height=2000mm × 1000mm。

6.各类型材及构配件规格为参考值，详细规格应按照本地风荷载、雪荷载停止核算。

6. The specifications of various profiles and components are reference values, and the specific specifications should be calculated based on local wind load and snow load.

7.南边地域，如遇台风应采用防风办法，可设置缆风绳。

In the southern region, in case of typhoon, wind prevention measures should be taken, and wind cables can be installed.