吉祥虎白菜彩金网论坛 是施工现场钢筋调直、曲折和焊接的场合。吉祥虎白菜彩金网论坛 咱们来看看是怎样装的。

The reinforcement processing shed is the place for reinforcement straightening, bending and welding at the construction site. Let's see how to install the reinforcement processing shed.

1、埋设预埋件(预埋件包罗在单柱钢棚内，双柱装置利用收缩螺丝)

1. Embedded parts (embedded parts are included in single-column steel shed, and expansion screws are used for double-column installation)

2、将主梁与立柱毗连器对接，(不要拧14个螺丝)，吉祥虎白菜彩金网论坛 先将斜撑装置在上斜撑上(用14个螺丝)。不然，支架的孔不对齐。

2. Connect the main beam with the column connector (do not tighten 14 screws), and install the diagonal brace on the upper diagonal brace (use 14 screws) in the reinforcement processing shed. Otherwise, the holes of the bracket are not aligned.

3、装置主梁(单柱主梁为140工字钢和50方管焊接框架，双柱主梁为50方管焊接框架)与柱之间的毗连件(14个螺钉)。

3. Install the connections (14 screws) between the main beam (140 I-beam and 50 square tube welded frame for single-column main beam, and 50 square tube welded frame for double-column main beam) and the column.

4、用叉车或吊车将立柱吊起装置，间距3米(单柱单柱为200工字钢，双柱为100方管)。吉祥虎白菜彩金网论坛 装置时，确保立柱的腰线在中间3米。方管柱底盘经由进程20*180收缩螺栓与预埋件毗连，H型钢柱。

4. Use a forklift or crane to lift and install the columns with a spacing of 3 meters (single column and single column are 200 I-beams, and double columns are 100 square tubes). When installing the reinforcement processing shed, ensure that the waist line of the column is 3 meters in the middle. The square pipe column chassis is connected with the embedded parts through 20 * 180 expansion bolts, and H-shaped steel column.

5、装置侧梁(50方管焊接框架)，双方用10×12螺钉，中间用10×18螺钉。

5. Install the side member (50 square tube welded frame) with 10 on both sides × 12 screw, 10 in the middle × 18 Screw.

6、装置檩条，底层6个2.99米钻尾，吉祥虎白菜彩金网论坛 顶层4个2.94米夹角铁，装上。

6. Install purlins, six 2.99m drilled tails at the bottom, and four 2.94m angle iron clips at the top of the reinforcement processing shed, and install them.

7、设置彩钢屋面，彩钢板尺寸为1.14*3.0米，中间每隔3米，在柱的摆布两侧安排三块彩钢板，吉祥虎白菜彩金网论坛 彩钢板经由进程钻尾丝与下檩条毗连。

7. The color steel roof is set. The size of the color steel plate is 1.14 * 3.0m, and three color steel plates are placed on the left and right sides of the column every 3m in the middle. The color steel plate of the reinforcement processing shed is connected with the lower purlin through the drilling tail wire.

8、四周装置告白布，用钻尾丝打边梁和主梁。

8. Install advertising cloth on all sides, and punch the side beam and main beam with drilling thread.

吉祥虎白菜彩金网论坛 的施工规范这天常修建施工中必不可少的。这类规范能够给咱们带来安心，保障修建的安稳性。更多相干内容就来咱们网站//feelingvision.com征询！

The construction specification of reinforcement processing shed is indispensable in daily construction. This kind of specification can give us reassurance and ensure the firmness of the building. Come to our website for more relevant content //feelingvision.com consulting service